10JNEX900川崎超級鐵芯超薄高硅無取向硅鋼片

core loss
低鐵損 core loss in high-frequency ranges is extremely low.this allows for low heat generation and size reductions formagnetic components such as high-frequency reactors andtransformers.
在高頻率領域中鐵損非常低。
充分發揮此特點，可實現高頻電抗器、高頻變壓器等機器的低發熱和小型化。
low magnetostriction
低磁致伸縮 magnetostriction which causes noise and vibration isnearly zero. this enables significant noise reductions for magneticcomponents such as reactors and transformers.
磁致伸縮引起的噪音、振動幾乎為零。
充分發揮此特點,可大幅度降低電抗器、變壓器等機器的噪音。
high permeability
高導磁率 the permeability is extremely high across a wide rangeof fre, making it highly suitable for use in shieldapplications and ct.
從低頻到高頻，導磁率非常高。
充分發揮此特點，可用于屏蔽用途或電流轉換器等。
stable
質量穩定 the high-temperature processing provides thermalstability. since there is minimal deterioration of the propertiesdue to machining, so stress-relieving anneals are not re
由于作了高溫處理，所以具備熱穩定性。
且加工導致的特性劣化程度低，
所以不需要做消除應力退火處理。
non-oriented
無取向性 there is virtually no difference in the characteristicsbetween the rolling direction (ldirection) and the transverse(c-direction). therefore, this can be used in a wide range ofapplications, from stationary machines to rolling machines.
產品的軋制方向(l方向)和寬度方向（c方向)的特性幾乎沒有差別。
因此，可廣泛應用于從靜止器到旋轉機等各種領域。